Hi Guys,

I posted this in the 04/05 600 and thought should do it here too.

Basically I swopped the main wiring harness of a GSXR 600 04 European with 1 off a US model.

When I turn on the ignition after the swop, nothing electrical work..except for a neutral light at the guage and a click sound in the starter relay.

When I turn off the ignition key, the tacho sweep once after 1 sec.

Nothing else works.. Fuses are all okay.

Just need some suggestions what to look out for

Thanks

think you will find that some of the wiring of the us model is different to euro spec. did you put both looms together before fitting? would suggest that you get a multi meter and check for power at the right places before you do anything else.