|
: CORRECT JETTING WITH A FULL SYSTEM GSXRacer6 06-06-2003, 12:43 PM I was wondering if anyone can help me out here. I have recently picked up a 02' SV650 and installed a full akrapovic system. It seems like it really needs to be re-jetted and if does any any suggestions. http://www.gixxer.com/forums/images/graemlins/confused.gif kippie 06-06-2003, 01:02 PM Desnorkle the filter 2 shims on the needle. 147.5 mains. 17.5 pilots. twist the throttle. GSXRacer6 06-06-2003, 01:54 PM Does Desnorkel the air filter mean.....raise the tank for more air? I would have a problem there.....since i have a standard SV with the raise bars (not clip-ons) and have a Scotts damper mounted, I cannot raise my tank due to the bracket. If I am not able to raise my tank.....what would be the correct jetting for that? Also, Factory Pro sells jet kits in stages.....any recommendations. kippie 06-06-2003, 03:39 PM Desnorkling the filter means cutting the tube out of the fir filter, go to www.svrider.com (http://www.svrider.com) and look under the 'tips and tricks' section. You do not have to raise the tank. as for the jet kit, either spend $100 on a stage one kit, or $10 for 147.5 mains, 17.5 pilots and 2 shims under the needle. Again, details are on svrider. GSXRacer6 06-06-2003, 04:29 PM THANKS KIPPIE! http://www.gixxer.com/forums/images/graemlins/thumb.gif | ||