Hey guys, i have a 93 750 and i would really like to know how to fit the 2k1 and up subframe onto this model. i've seen u guys do it. what do i do!? i want to do this before this summer.

-luis

I dont know much but your best bet is to ask "UK Lee" he just added a gixxer subframe to his oil-cooler. And another person added F4 honda subframe. Sadly, it fit the body frame almost better. So scan this forum, although UK Lee old photos have been lost, he may repost. He hand sawed mounts from aluminum. The other gentleman basically just welded straight to the frame.

Good luck,
Travis

chelapa said:

Hey guys, i have a 93 750 and i would really like to know how to fit the 2k1 and up subframe onto this model. i've seen u guys do it. what do i do!? i want to do this before this summer.

-luis



I just fitted a R6 subframe to my 93 750. I like the Way UK lee did his (and his is a clean install) and you can do yours that way or like me I chose to modify the R6 subframe to fit the OEM Brackets. Anything is possible as long as you have access to a welder and are good at fabricating.

Jim

Here is mine .. I had to cut down the F4I subframe cause it was way to long .. so I then decided to weld it directly to the frame .. but here is how it turned out .. I am still waiting to get paint on it .. and my exhaust is now a high mount .. so it looks better .. this week look in the pics section .. I will have some updated pics ...but here is some for you now


http://www.gixxer.com/uploads/IM0003982.JPG

http://www.gixxer.com/uploads/gixxer10.JPG

It is ready for the paint now .. however .. my brothers shop is so busy i have to wait for a slower weekend ..