Pazzo Levers: http://www.motomummy.com/pazzo.html use coupon code "pazzo" without quotes to get your gixxer.com discount applied. Those living outside america will have shipping added on. Anyone inside america qualifies for free shippping just like all of our other products.

Pazzo levers are CNC Machined of 6061-T6 billet aluminum, to precise tolerances.
Both,clutch and brake levers are fully adjustable Stainless steel fasteners and cadmium plated custom made springs. T
hey come in a variety of anodized colors.
The swirl marks you see in the levers are there for effect and the brake/clutch markings match each other.
They give the levers a very distinct look that can't be missed.
These levers make it easier to adjust the lever to fit your hand for comfort and to make things easier.
The adjuster is the lever you see that alows you to adjust the lever in or out depending upon your finger length/reach.
We have 75 combinations available and all are STOCKED.

If you guys have pictures of these on a gsxr please post them all up so others can see how well they match the bodywork and look on their exact model of bike. Thanks guys!

i will be ordering mine within the next day or 2...thanks

*squirt*

Here they are on my black/silver K5 600. Motomummy rocks!

Just ordered mine...thats an insane price, Thanks

oh and send me some MotoMummy and Pazzo stickers too if possible...thanks!

thx for the pics, the more pics of gsxr's that there are in this thread the more it will help people who are curious about colors etc...

need some feedback. i dropped my bike and broke the stock clutch lever now i want to upgrade to some pazzo levers but just not quite sure to go for the longs, shorts or combo levers? thanks...:cheers

about 1 out of 30 get longs, the rest get shorts. I would only recommend longs to people who like the looks, have bad hands, have an upgraded clutch so it's hard to pull in, or ride in a lot of rush hour traffic. For the rest shorts almost always leaves them a very happy camper :)

if you DON'T install them we can easily swap them out for another set as long as you cover shipping. this should help you make up your mind, because when you get them you'll be able to see how they fit in your hand w/o installing them. We also swap out adjuster colors for the same minimal fee. just cover shipping back to you.

Hey Corey,

I am considering upgrading mine, but was wondering if you happen to have a pic of the Blue Pazzo's on a blue / white 600? I looked on your site and couldnt seem to locate one. Or perhaps a fellow gixxer.com member has a photo to share.

:cool cool Look forward in doin buisness real soon thanks. :cheers

Hey Corie,

I got my puig screen in... I LOVE it thanks bro... can't wait to get my Pazzo Levers now

http://img236.imageshack.us/img236/2718/2bikesbw9.jpg

looking good...told you it takes a tad longer to canada, but we always come through :)

looking good...told you it takes a tad longer to canada, but we always come through :)

CHeers:cheers

btw get that bike out of the snow bro :)

Here's a pic:cheers

is it wasy to get your whole hand on the shorts? or jsut the 3 fingers?

btw get that bike out of the snow bro :)

Its snowing like mad right now arrrrrrrrrrrg I hate snow

you can get about 3 fingers on the shorts...

what's the process to install them? is it simple and something i can do myself? or do you have to mess around w/cable play and stuff like that? thanks for the info.

I can get 4 fingers on the lever, although my pinky is on the very end. The install process could not be easier, took me about 15 min. tops.

what do you have to do? any explanation at all? i'm not the best at installing stuff and don't want to mess anytning up.

you basically just take your old levers on, put these on (screw driver and socket normally is all it takes). then you adjust your cables if you have to. Many don't have to adjust anything and it takes about 10-15 minutes to install them.

Yet, to have anyone tell us it's a hard install. Less work then changing your oil in my opinion

sweet thanks for the info Corey.

would the blue levers "short" look good on my bike? or at least match?

You can get the colored levers and if you DON'T install them we will swap them out if you just ship them back and pay for the new color to be shipped back to you. I only say that because when you get colored levers it's hard to say if the color will match your bike perfectly or to a point where you're happy, but for a minimal fee we'll swap them out for a diff color you want as long as you didn't install them.

The safest route? Buy black levers with a colored adjuster. There isn't enough color on the adjuster to really color match but they sure stand out nicely. If you get a colored lever then there is enough color there that you'll want it to match or be close.

I hope this helps you decide. Black lever w/ colored adjuster is the safe route, but if you want a colored lever and don't like it we'll swap it out as long as you don't install it for the smallest fee we can (you just pay shipping back to you on the new set).

Hope this helps. All are stocked and ready to go also

thanks for the help i'm just trying to decide. may have to go w/black i guess if anyone else know's if they will match let me know. it's the blue/white 2004 600 the blue i saw on the site looked pretty light so if anyone has a pair of blue on the 04 let me know.

you also have to remember that every batch of anodizing is slightly different...it's close, but not 100% like a different batch

How long is this offer going?

pazzo's we also do a sale price for forum members ;) no worries bro

Awesome. I will order a set from you in the future. Thanks

saw a few of you recently ordered. Will all ship on monday morning...

If i ordered this past wednesday morning, when should i expect the levers in?

pm me your full name or order number and i'll tell you exactly when it shipped. If they went out wed (most likely) I would say you would get it today (sat). Most people get them in about 2-3 days. Get me your name and i'll get you the status...

Got my levers today after ordering them on Wednesday morning and they are awesome, i will be installing them on monday and i will post pics, i also will be dealing with MotoMummy again soon for some rear sets, thanks Corey!

glad you got them quickly. we stock all we can and our main priority is fast shipments and customer service :)

i'm sure you'll like them more after you see them on your bike. can't wait to see the pics

I've been back and forth on ordering these because I'm undecided on the color combonation. How well does the gold lever match the front fork (k6 GSX-R600) and the gold Giles rearsets? The lever to fork match is more important to me because I can always order black rearsets.

I really like the color combonation on the CRGs on the feature bike on your main page and that's what got me thinking about the gold lever.

anodizing is always different. every batch is slightly different. that feature bike now has pazzo's :) he didn't like the silver perches that crg had and he went to black levers. the pazzo perches all are black which looks cleaner.

I can't answer on the gold to be honest. IMO the black levers w/ a colored adjuster is the way to go because there isn't enough color on the adjuster to be able to see if they are different shades then other colord pats of the bike. If you get a colored lever then you can see if the shades don't match. Even crg's don't always match the gilles/rims/etc...

Sorry I can't give you a perfect answer, but there is no way to when it comes to anodizing and shades of it. It's not like paint with color codes :(

imo the black levers w/ coloread adjusters is the way to go...no matter what you get though I can tell you that we've never had anyone regret the mod. So far everyone seems extremely happy with them

will powder coating these levers affect it?

imo the black levers w/ coloread adjusters is the way to go...no matter what you get though I can tell you that we've never had anyone regret the mod. So far everyone seems extremely happy with them
I was leaning that way. I'll probably order some this week. Now I just got to decide, black with gold adjusters or black with red adjusters. :D

both combo's are awesome and if you want a diff color adjuster for 10.00 we'll swap them out and ship it back to you...that helps some people's thoughts as they know they won't get stuck with a big fee if they get them and wanted a diff color adjuster.

hey corey. how do you feel about powder coating these levers? good or bad idea?

i wouldn't suggest powdercoating the levers since they are annodized already...i don't think it will adhere as well...but i'm not a pro

i wouldn't suggest powdercoating the levers since they are annodized already...i don't think it will adhere as well...but i'm not a pro
Most people/shops sand blast anything they're going to powdercoat.

MotoMummy :thumbup Best place to get them.

thanks for the pics...if others could post theirs up it will help people who are wondering what size/color combo to go with.

Corey,

I've had my eyes on these for a while now but still can't decide whether to get both shorties or a shorty brake and long clutch.

I've read through most of these posts and in the summers I commute into the city on my bike a couple times a week. I usually hit traffic, sometimes heavy once I get close and the same thing leaving. Once i'm out I can float home. So basically i'm stuck in traffic for a least a part of my trip each day, would having the shotry clutch make my fingers feel like they are going fall off since most likely i'm going to be using it a lot once I get in town, or do you think I would be okay with both shorties?

Thanks in advance

if you're in rush hour traffic i would get the short/long combo. if you later want to go to a shortie we are gonna be offering a deal to sell parts and put them on :) for cheap

sounds good..........i'll most likely end up going with the combo then as that's what i've been leaning towards. Thanks again man, I appreciate it

Just ended up ordering these tonight after I got off work, ended up going with the shortie brake and long clutch due to fact I get stuck in shitty traffic pretty often in the summers commuting out of the city after work.

These should look kick ass on my bike once I get them on.

Thanks again Motomummy :cheers

Anybody got any pics of the blue ... long or short it doesn't matter? I have a 06 blue/white 600 and am debating on black with blue adjusters or blue levers with black adjusters. I checked the site but didnt see any pics of the blue.

brianinms: black w/ blue is the way to go. the black and red are now darker then they use to be and i'm 99.9% sure it won't match or be close. the gold is now awesome though. like ohlins, marchesini gold, carrozzeria, and gilles. AWESOME finish on the gold, but the red/blue are now darker by a good bit.

black w/ blue would be my suggestions, but for those contemplating gold it's now INCREDIBLE...use to have a slight yellow tint, but it's incredible now. anyone who has recieved gold in the last few weeks will know what i mean.

the anodizing changed a little a few weeks ago in an effort to get a little clearer gold and i'm not sure on why the blue/red are a tad darker, but i'll find out.

hope this info helps, just to make sure everyone is happy and likes their choices...btw if anyone has gold in the last few weeks pls post up a pic or two

if you're in rush hour traffic i would get the short/long combo. if you later want to go to a shortie we are gonna be offering a deal to sell parts and put them on :) for cheap

What is the lever combo? I will be ordering Blk/red levers for sure. Also gonna
need Vortex base set. Wife got me the sliders without bases. Undecieded on the
Marchesini's, but real close to pulling the trigger.

use the coupon code "pazzo" without quotes to get the forum price for the levers, BUT we offer both shorties, both longs, or a long clutch with a short brake combo. You pick the combo you want.

check out the carrozzeria's. his new busa wheel is INCREDIBLY lightweight and it's much cheaper...pm for pricing on the rims

Is the new gold you speak of for the levers also used on the adjusters? I was going to order some black with gold ones today in hopes of them getting to me before the holiday. Is that likely?

Ok. I ordered. I'm impatient. ;) Do you think they'll make it here by Wednesday?

lol they are going out today. you should see them mon/tue at the latest bro...

My hero.

Did you like my user name? :D

Damn you ship fast as hell Corey can't wait to get in my levers and get them on the bike.

Any chance you can make winter end as well?

:cheers

Any chance you can make winter end as well?

If you could to that, then you would be everyones hero. Atleast all of us that live in the northern parts of the country. LOL...:wacko :punk

i wish i could make winter end LOL i'm in northern minnesota here...Haven't been riding for well over a month now. Pretty much 2 months or a bit longer

Damn that DOES suck. I've only been out of commission for about 2 weeks now but it does already suck.

Got the levers today Corey and all I can say is wow, these things are top notch in qaulity. Thanks for the pazzo resavoir covers and stickers too. I'll get them installed this week once I'm done with work and post some pics up. The red is actually more towards a maroon color and matches up with my bike pretty good too, which was another plus.

Thanks again for the quick shipping, these things are gonna look kick ass once they are on the bike

Sweet. Hopefully mine will show up tomorrow. :D

glad you guys like them...we do our best to ship fast! that's why we have every possible combo in stock...

pics of the red would definately help some people out on here. Thanks

I will be getting you some huge pictures of the black and gold when mine get here. What resolution do you want? And did you ever get that 300dpi picture you needed?

it was close, not 300dpi though :( it was 240...if you can pull off 300 dpi that would be awesome

I have some friends with DSLRs. We'll see what we can do for you.

thanks man, that would be awesome! looking at it for some magazine advertisements :)

Got the levers today Corey and all I can say is wow, these things are top notch in qaulity. Thanks for the pazzo resavoir covers and stickers too. I'll get them installed this week once I'm done with work and post some pics up. The red is actually more towards a maroon color and matches up with my bike pretty good too, which was another plus.

Thanks again for the quick shipping, these things are gonna look kick ass once they are on the bike

That sucks, i never got any resovoir covers and stickers with my levers...:wtf ...lol

we ship out pazzo reservoir socks as we get them. we get them because of our large orders and when we do we ship them untl we are out of them *shrugs*

we get say 5-10 of them with a 80 set order of levers

Got my levers today. I installed them in about 5 minutes. Very easy. It's raining here so I haven't had a change to try them, but they feel nice in my garage. :D

I got some pics of the levers off with a Nikon d80. I'm going to take some pictures with the d80 in a few minutes. :cheers:

http://img.photobucket.com/albums/v293/teamtopend/DSC_0019.jpg

http://img.photobucket.com/albums/v293/teamtopend/DSC_0018.jpg

http://img.photobucket.com/albums/v293/teamtopend/DSC_0030.jpg

http://img.photobucket.com/albums/v293/teamtopend/DSC_0023.jpg

http://img.photobucket.com/albums/v293/teamtopend/DSC_0028.jpg

http://img.photobucket.com/albums/v293/teamtopend/DSC_0027.jpg

http://img.photobucket.com/albums/v293/teamtopend/DSC_0025.jpg

Well I got the new levers installed tonight after work and they didn't take long at all, under 30 minutes total after I got everything adjusted the way I liked it.

Putting the brake on was a cinch, the clutch wasn't hard either just remember to loosen the clutch cable or you'll have a harder time getting the cable free from the clutch lever prior to removing it from the bike. Overall these look great on my bike. Here's some pics for your enjoyment of the Red/Black Short Brake Long Clutch :cheers

Motomummy Rocks :punk

28079

28080

28081

28082

28083

I like the red a lot. :cheers:

Which front stand did you end up getting? Is that DMP? How did my technique work for getting your bike on the rear stand?

Thanks, I can't get over how much I like the red too. It matches up with the maroon color of my 750 almost perfectly.

I ended up going with the DMP S-Spec Front and Rear Stands but unfortunately i'm still having some problems getting the bike up on the rear without someone giving me a hand. I've tried placing some wood under the kick stand to balance the bike, holding the rear (after taking the rear seat off), but the bike tends to wobble a bit when i get ready to put it up on the rear and I get nervous that i'm gonna drop it.

It's up on the stands for the winter (unless I get some more carbon parts that forces me to take it down :) but I'm sure i'll give it another try coming up here.

Anyways, the gold on black looks decent, plus it matches your bike perfect. :cheers

thanks for the pics and 300dpi, you rock man!

pics definately help people decide what levers they want. thanks a lot guys. the more combo's of levers we can get in this thread the more it will help other members of the forum out...thanks again

My pics were 300dpi? How do you tell that? Was I the first to get you 300dpi? ;)

open it with photoshop and then choose image size and it will show you the resolution etc...yes you are the first to get 300dpi...i have a feeling your pic willbe used in a magazine if that's okay with you. For print you have to have very high quality images or else it looks blurry. You basically need a high end camera to do it and i haven't bought on yet, but soon I will be. Thanks and let me know if it's okay to use your pictures. Glad you like the levers bro...

Sure, you can use the images all you want. Let me know where you advertise. It'd be sweet to see my bike in an ad. lol

will do and thx, btw to those who ordered levers we will be open fri and shipping them all on fri :)

I've had several pm's regarding if this sale will go through christmas and it will. After the new year there might and i stress MIGHT be a price increase. I will still do my best to get members the best possible price on the levers, but it's possible that pricing might go up a little. Through Christmas though this price and sale will remain. Hope this helps people out...

ordered tuesday, have them today. thanks corey

not a problem bro...we only have about 300 sets at any given time laying around waiting for new owners :) we are like a pazzo orphanage

ordered a chainkit last week came super fast, and just ordered the pazzo levers which i expect will also be here fast, thanks for the awesome service and great prices!

we do our best to get stuff out quick. you should see them in a few days :) stocking products is one of our most important goals.

put in my order, I'll take pics when installed.

all shipping today :)

Thanks for the levers, took me 5 minutes to install both, got the shorty brake/long clutch combo, man....these things are top notch race quality....Just got them a few days ago....:cheers They look great will post some pics soon...

glad you like them so much bro :) they definately are incredible quality

can now go straight to http://www.pazzolevers.com and enter your coupon ("pazzo" w/o quotes) and get the deal :) takes you straight to the pazzo webpage guys

merry christmas to me! just order up a set of pazzos and some reservoir bands:drool. cant wait to get em installed. just out of curiosity how do you ship these UPS fed ex?

priority mail. they went out today bro :)

and a late merry christmas to you :D

Short or long?:confused

priority mail. they went out today bro :)

and a late merry christmas to you :D
damn didnt think they would ship untill tomorrow! thanks for the fast service.:punk
merry belated christmas to you too.:biggrin

Short or long?:confused
shortys, black w/ black adjuster.:yumyum

we ship asap bro :) we stock all we can and ship as quckly as we can.

btw all: pazzo is closed for all of this week and reopening on the 2nd. inventory is going fast and will be a few days to get stocked back up. being the only pazzo dealer to stock the levers many are coming to us and we are going to run out later this week i would assume. if you want them quickly get them now. i assume we'll get restocked mid next week and as i hope to get more overnighted to us

Well ordered mine... can't wait to get them... But I forgot to use the code... :-( oh well... still a great deal. Maybe I will get a Res. Sock in the package LOL.

we only can do the coupons before the order based on how the system is setup, but if you email us we can toss in a reservoir stock. it doesn't fully make up for the coupon, but it's close and we can do that. the coupons are attached to our accounting/database as it's all automated. shoot us an email so we know who you are and i'll make sure you get a resevoir sock to help make up for it :)

Hey Corey, where are the pics that I took for the magazine being used? I wanted to pick up a copy.

i haven't changed the add yet, i'm going to be though. just been busy :) you know how it is...

Thanks Corey I sent an email last night and also ordered the Stompgrip's I've been wanting... Couldn't decide on a color but after I posted in the forums I think I worked it all out. Thanks for your help.

sounds good bro :)

Just placed my order. $143.55 shipped. Gotta love maximum discounts.

musta used google checkout :) it's a very slick system...will ship on our next business day bro :) you got a hell of a deal. 1% off right now if anyone orders using google checkout. very slick stystem compared to paypal. hides the customers email, last name, and lots more security features. i'm beyond impressed with google checkout

What are the pros and cons of long or short levers?

Surely short ones require more effort to pull due to the leverage?

What shall i go for? :confused

the shorties take a little more effort, but not much. all pazzo's are slightly easier than stock levers due to the changed fulcrum point.

the shorties do outsell the longs about 30 to 1.

if you don't like them and have NOT installed them we will take them back and waver the restocking fee. you just pay for shipping to return the different set to you. this way you can order them and if you don't like them and haven't installed them we'll swap them out for different color/size for a very minimal fee. 5.0 to ship back to you.

What are the pros and cons of long or short levers?

Surely short ones require more effort to pull due to the leverage?

What shall i go for? :confused
lol...I had the same question.
Also need to know if the Woodcraft covers replace the OEM covers.
I'm ready to get my order on. :)
Thanks

What would the postage be to the UK for a pair?

PM me with postage if the mods allow it. I'm gonna be kinda busy the next few days.

Have a Great New Year People x

:cheers

sent you a pm bro.

the woodcraft covers normally replace the oem cover unless it states otherwise :) they make a few that go on the outside, but it's very few.

Got the levers the other day. They look great, and great service like always from you. Ordered the Chain breaker kit thing today. Im sure ill be doing more business with you, just dont make enough $ to buy it all at one time :D

the chain breaker/rivet kit will go out on wed. mon is holiday and tue usps is closed due to president Ford's death. RIP.

The next day they are open it ships usps priority...it's in stock

yeah thats fine. Thanks alot!

for those who want to know how hard they are to install someone did a great write-up. it's on an 07 r1, but it's basically the same
http://www.motomummy.com/Forum/showthread.php?p=340318#post340318

we get requests from people wondering how hard they are to install and this will give you an idea of how easy it is

tue usps is closed due to president Ford's death. RIP.
aww thats sucks i was hoping to get my order tues:( . oh well rip.

yup, usps just found out fri morning. closed on tue :( oh well, nothing anyone can do about it

Not sure if this is the wrong place for this but I have tried everything I can think of. I placed an order on the 23rd of dec. and on the 27th I was told the part was not in for whatever reasons and that was cool. I've sent in sever al emails since on the 4th and the 5th and neither has been replied to and no updates on the status has been made to me what so ever. All I want to know is what is the status and if I can't get the part I ordered can I get a refund of my money that was taken from my account the day I ordered. Not trying to slam Moto mummy cause I have recieved good service but this one is starting to make me look for other sites to order from. At this point I just want to know what's going on?

i'm assuming you haven't checked your spam box as every email has been responded to up until fri when we were out of hte office. we just got back in town. our voice mail even says fri we were gone and through the weekend. all emails until then were responded to.

we were out of gold adjusters and perches for older suzuki's right after christmas, but all has been shipped out. EVERY set of pazzo's have been shipped at this point. have you tried calling, a pm to me, or check your spam box? Most likely when people don't get a response from us it's because our response was put in their spam box or it was filtered from their email.

ALL pazzo's have shipped, but i can't get you any info w/o a name or order number, then i can check the tracking. next time just pm us as we respond very quickly. that or check you filters and make sure we are on a safe list or what not. Get me that info and i'll get back to you with tracking tomorrow.

i hope a response this fast on a sunday works for you :) we just got back in town a few hours ago. anything i can do just pm me

Sorry my order number is 3300 and my emails from the 4 and the 5th have not been answered. They came from waltlove. They were for the Pig spotter mirror's but there was no forum for them so I couldn't post a reply.

i emailed you back on the pig spotters. I remember it since it isn't a very popular item. the distributor wasn't shipping from christmas to new years and we haven't recieved them yet. Should be in any day. We don't stock them as they are not a popular item with suzuki's. should be in anyday, normally we get them in 2-3 days, but we don't stock them as it's a slower moving item.

Just to chime in, I got these Levers last week for my B-day, and have not put them on yet but just looking at them and holding them in my hands they are an incredibly solid product. Fit and Finish look super tight and aesthetically they are ao sharp. I would certainly recommend these as an upgrade, and I can't wait to actually get to use them.

yes the pazzo levers are a super hot item. we've never had one problem with any of them and the fitment/finish is top notch...no doubt about it

i have also ordered a set of pazzo levers - corey has been very helpful :)

can't wait to fit them :wait

they are going out tomorrow bro :) our post office is closed today :( you'll see them before long though and i'm sure you'll love them just as eveyrone else has.

cool :cheers

yup, you'll love them...

installed my levers a few minutes ago it took 5-10 mins and they look incredible, super glad I got them.

awesome bro...post up some pics! i'm sure you'll love them once you start riding on them also

I can't wait to start riding on mine as well, can't wait till winter goes away...........by the way I was able to get that bolt for like 5 bucks with a new nut. Slapped it on the levers and I was good to go

Hi Corey, it's been a while. But I just placed an order for a set of levers and a PUIG screen. Can you take a look?

When I was checking out, it wanted to add $25 to ship to Guam. Is that correct? Priority Mail costs the same to Guam as it does to any other state...do you use the post office to ship?

yes we ship to guam and if it tried to add 25 then pm me what you want and i'll send you an invoice for the products as long as you give me your email and exactly what you want...no worries

Just ordered my pazzos today. Black with blue adjusters. :punk Also ordered the grunge brush and a motomummy band. And the price :eek couldn't get any better. Keep up the good work Corey.:cheers

got my levers today they look dope as hell. cant wait to install em.:cool

Ordered my set of Pazzo's Levers today, (Black with red Adjuster). Been wanting a set for a while now, at the current price couldn't turn it down. I'll post pics once I get them installed. Thanks

you will love them and smart move as the price could go up at any time. i know the idea is being passed around with the dollar falling and the alum prices going up...

you'll get them quickly and love them i'm sure...

Got my pazzo's in today. :punk That was wicked freakin fast corey. Just let me know when the grunge brush comes in. Thanks and keep up the good work. Will definately do business with you again. :cheers

thank you very much for the compliments...we have the brushes on order and shouldn't be much longer.

i'm glad you like the pazzo's, they are surely a trick item

Just ordered my levers. Ended up going with a long clutch and a short brake. Also picked up a Puig race screen. I took advantage of the discounts you had for the pazzo's and Puig windscreens. You truly have the lowest prices on the net!!!!

Just ordered a pair of black shorties with the blue adjusters for my blue/white k6 600! Looking forward to trying them out. Corey pointed me over to the Pay by Google and it gave me an additional 2% off! Thanks Corey!

just so you all know. the perches we are out of right now (just the clutch), but we should get more tomorrow or the day after. just so you guys know...we got caught off guard by a huge flood of orders, but we are having more sent express mail to us so they should be here quickly! hoping tomorrow...

corey

corey,

my shorties arrived yesterday - they look & feel fantastic on the bike, just need to test ride it now!

thank you,
marko

glad you got them :) post up pics...they are definately one hot mod. nice to see they got to australia quickly also

just so you all know we got our shipment and tons of orders going out and stocked back up :) sorry for the glitch in inventory. we try and do our best sometimes we get caught off guard

how long will the special price be good for ??

unknown as i know there is talk of bumping it...

do u have the black crg s ? i pefer them over pazzo

from now till feb 1st ALL PAZZO'S go with a motomummy reservoir cover :)

from now till feb 1st ALL PAZZO'S go with a motomummy reservoir cover :)

You serious??? I just missed this deal!!!

btw all, you might want to get on this fast as this could end...i can't give an eta either, but there is a good chance it will end soon

Well I'm in the states right now, but my wife just told me that my Levers arrived... Can't wait to get back and put them on. I had her open the box and she even said that they look great!!!! I'll post pictures once their installed. Thanks

of course they look great :) they are pazzo's...hehe

Hey my Chain adjusters came in today:punk. I need the chain kit now??

glad you got them bro :) if you're looking for a chain kit pm me what bike/gearing you're looking for and i'll let you know what we have in stock

hey corey any pazzos in stock? if i order tonight can i still get that reservoir cover?

tomorrow EVERYTHING will be in stock again. the deal with the reservoir cover is over though. sorry

Corey, I just got my levers and PUIG screen yesterday. Thanks for the best prices and the quick service. The discount codes are awesome!

-Dan

glad you're happy :) post some pics of your products...

just placed an order for some black pazzos. used google check out for my little extra discount :D

Corey, I jusr placed a rather large order,(atleast for me) could you let me know when this has been shipped. Was gloves, pazzos, chain kit, chain tool, speedo healer. Thanks bro!
Dave

you can check online via our order tracking. it will go from pending to completed when it ships. it should all go out today i believe.

i cant wait to get my pazzo's and speedohealer!!

does anyone know th best way to remove th adjusters are they just secure w/ screw + loctite also i am gonna remove it to bleach test it and possibly fade th deep red as i want a much lighter red

you need a special tool or you will scratch it up bad. btw if you install it wrong on the inside you can damage the parts...

they are installed an fine but i wanted to take off just th adjusters so where can i get th tools as i started w/ a hex an socket but stopped cuz it felt like i was gonna mess it up

you can't get the tools they are machined by the makers. for liability reasons you will not get help opening them up from anyone. if you want a different color adjust we can service them for you, but you can't get the tools as they are custom cnc machined tools. also there are some VERY small parts in there. if you lose them your levers can't be used. If you open them up you're on your own basically...if you want a different color we swap them out for free, you just have to cover shipping back to you. last person that opened them up lost some internal parts and had to buy another set. Another guy couldn't get them put back together and had to send them to us and pay extra to have them assembled. we do lots of work for free, but if someone opens them up and sends us parts we do charge the customer out of principle because the parts aren't to be opened for safety reasons. I hope you understand. Trust me it's not as easy you would think.

ok well im glad i decided not to F w/ it idk if this will change your policy but i have installed th levers can u still exchange them also the only reason i would exchange is for a lghter shade of red adjusters which im not sure you'll have i know anodizing them makes some come out a shade or too off which is why i was wondering u had any that came out in a light shade as mine are a dark maroon btw MOTOMUMMY kickass i ordered them from them under aweek ago an have been given prompt customer service preorder during shipping and as u can see after delivery

we don't have any lighter ones at this time :( all the red ones are coming out a slightly darker red. on the good side the gold is now more of an ohlins gold.

i'm not sure how to make them a lighter shade of red though. if you want to buy a set of red adjusters off us i can do that then you can make them the color you want and when you're ready to have them put on the levers just send us the extra adjusters (color you want) and the levers back and we'll swap them out and turn them around toward you the same day we get them.

let me know...i just would not recommend opening them up yourself. took us a while to learn all the tricks and we even lost some parts in the learning process. it's not hard, but there are some tiny parts for sure and a special tool is definately needed. pazzo cnc machines a tool so that you can make it do what we need it to.

anyway, let me know as i'm willing to work with you on getting them to the color you want. i could even get you bare adjusters and let you anodize them then send it all back to us and we'll swap it out for you?

ok i read somewhere about anodizing but i dont really want to do a whole setup for two small adjusters i will send u a PM when i find a place and we can do a swap

btw all, you might want to get on this fast as this could end...i can't give an eta either, but there is a good chance it will end soon


Please tell me your not talking about the pazzo deal!

I need about another week!

Corey, I ordered on Friday but when I try and track the package it says there has been no activity just that the USPS was notified of a pending pick up. Is it because it has not shipped yet or is there just a glitch in the system? Thanks again.
Dave

homerrunchamp: it's not tracking, it's a confirmation number...it will state when it's delivered and nothing until then. covers you and us that way :D

homerrunchamp: it's not tracking, it's a confirmation number...it will state when it's delivered and nothing until then. covers you and us that way :D
Ohhh..... Ok, sounds good, I will be waiting patiently. I hate waiting for stuff, lol, oh well it will get here soon enough. Thanks again.

you'll get them before you know it :) we try and keep good inventory...

story of my life i ordered levers and some other stuff sat. and never saw this thread. i musta been:sleep :cursing :hammer

sorry man, just stay tuned to our section for deals :)

btw if anyone else is lookin at pazzos heres a pic that gives a better view of th reds actual shade
http://i9.tinypic.com/487jev8.jpg

please tell me that's the long clutch lever, not a shorty

no its def a shorty thats just a weird angle here check this one
http://i7.tinypic.com/4dexzeb.jpg

much better

http://www.zuki-busa.com/resources/_wsb_300x400_img_2063.jpg

http://www.zuki-busa.com/resources/333rezuki.jpg

good pictures guys, thanks

got my levers today. look great! any idea when the rearsets will go out? corey gets a big thumbs up for great service!

thank you. they should go out very soon :)

btw with all the pics in here you might want to enter this contest. all you need is a picture of pazzo's. just wanted to make you guys aware
http://www.motomummy.com/Forum/showthread.php?t=22516

Contemplating the levers....the wife will kill me but is it worth it? O.o

we can ship it to her in her name and you say you got them for her :) hehe

it's definately one of the most popular items we sell. cheap, looks great, and is functional.
maybe you should ask her though :D

Corey, I recieved my chain kit, tool and gloves but no pazzos or speedo healer. When can I expect these to ship out? I wish I would have known in advance that they were out of stock and not been waiting on them. Thanks, but please lemme know.

they are already shipped as we were only out for a day or two.

Received and installed my pazzos yesterday. worth every penny :D. people have mentioned that there is supposed to be some play on the clutch lever...well my pazzo clutch has a bit of play, but not as much as the stock lever. is this normal or do i need to go back and do more adjustments?

depending on your bike you might have had to use the oem bushing out of the clutch lever and put it into the pazzo perch. other than that there should be very little play if any at all.

yeah i remembered a post about that bushing, so i made sure i placed it in the pazzo lever

contact pazzo directly then if you think something is off, but it should feel firm. At least as firm as your oem if not better. if there is anything i can do let me know, but it sounds like you installed it correctly.

I posted pics of my bike with the levers installed in the Pic&Videos fourm!!! They are kick a$$!! Thanks

glad you like them! they definately are a great mod. we'll have pics of them on our k7 the day we get it :)

If a guy was to go shorty on the brake side, would he also go shorty on the clutch side, or are most people sticking with a full size clutch lever?

i went shorty both sides and th brake took more getting use to but it looks so good when theyre both short plus i like th feel of smaller levers it frees up th controls i mean its still possible to get a whole hand over th lever but u wont ever need to if u adjust it properly which is th benefit of these levers

nearly everyone buys both shorties. both shorties are what 27 out of 30 people get. out of the other 3 one gets both longs and the other 2 people get shortie brake and long clutch. that is what our stats program is telling us. both shorties are by far the most popular. some say it takes time to get use to, but very few people end up wanting a long clutch. just takes time to get use to it. kind of like switching your shift pattern to reverse/gp shifting.

http://www.motomummy.com/Forum/showthread.php?p=347505#post347505

guys we will be giving away a 150$ coupon to our store. details are in that thread and all you need are pazzo pictures...get creative. I really would like to see more gsxrs entered :) i know lots of you guys have these levers as i process everyone of the orders you guys put in for pazzo's. which are a ton

Corey, THANKS! I have now recieved everything. The Pazzos look great, now all I gota do is tackle the speedo healer. Thanks again.
Dave

I'VE GOT PAZZOS ON ORDER!!!!!

sorry, I'm a little excited! can't wait to get 'em!

Just installed the shorty clutch lever on Sat. and have the brake lever on order. 5 minutes to install and they are very nice.:punk

yes, we have a ton of them going out this week to you guys :)

yes, we have a ton of them going out this week to you guys :)

Thanks Corey.:cheers

not a problem. all shipped today and we are LOADED on inventory.

Any comments on the blue levers? Wanna buy a set for my '02 blue/white 600, but not sure if I should go with the blue, or stick with the silver.

hard to say. i would say the pazzo's are a darker blue. silver might be a better bet if you ask me.

Thanks for the response. I think I'm gonna go with the blue with the silver adjuster.

they will ship tomorrow if you order tonight. you should have them the day after most likely. thur at the latest. we are in MN :)

Just ordered. Thanks Corey.

will go out tomorrow :) you should see them in a day or two at the latest based on your location

How long to ship to Ontario, Canada. My buddy and I just ordered two pairs for my gixxer and his Daytona 675. He told me 3 weeks, but I'm thinkin thats just so he can wait to give it to me for my birthday. It wouldn't take three weeks, would it?

we ship global express. normally about a week :)

Corey, I sent you a PM.

Any word on my levers Cory?

all have shipped...

I rode today with the shorty clutch lever for the first time. Feels great, like riding a BMX.:punk Corey i'm curious if there is any demand for a non-adjustable lever?

You are the man!!!!! Thank you a million for all the help with my order and all my mistakes. Your patience and understanding is amazing!!!!!!

nah, everyone wants adjustable. we just added a new color "titan" which is a pretty cool looking gray color.

glad you guys like them, they are a hot item for sure

nah, everyone wants adjustable. we just added a new color "titan" which is a pretty cool looking gray color.

glad you guys like them, they are a hot item for sure

Yeah I suppose it would be hard to have only 1 position. I prefer them fully extended. Just a thought.:cheers

Got my lever today. Corey you da man.:cheers It's r*ining but I can install it and sit in the garage and go vroom vroom.:lol

Hope to have mine today too. :)

glad you got them, lots of guys will be getting theirs anyday. we now have enough inventory we even put up a promise that if we can't get them on their way to you by the day after you order we'll give you a coupon for 50% of the price you paid for that item :) we are swimming in levers since we had to raise inventory for you guys :D

post pics when you get them installed

glad you got them, lots of guys will be getting theirs anyday. we now have enough inventory we even put up a promise that if we can't get them on their way to you by the day after you order we'll give you a coupon for 50% of the price you paid for that item :) we are swimming in levers since we had to raise inventory for you guys :D

post pics when you get them installed

Yeah i'll do that. Thanks again Corey.:cheers

Here they are Corey. Simple install!!!

http://i157.photobucket.com/albums/t60/jdkarafa/Bike/Pazzo014.jpg
http://i157.photobucket.com/albums/t60/jdkarafa/Bike/Pazzo019.jpg
http://i157.photobucket.com/albums/t60/jdkarafa/Bike/Pazzo016.jpg
http://i157.photobucket.com/albums/t60/jdkarafa/Bike/Pazzo017.jpg

very very cool pictures...hopefully it helps others who are torn on what color

Is the sale still ongoing?

Got mine today, and i have to say that they are "THE SH*T". I couldn't ask for a better lever. Thanks motomummy!!!!!

yuppers :) responded to your pm also...

Just ordered mine yesterday, along with the reservour sock :) . Can't wait.

thnx ordered my k7 ones just now via paypal.. thnx

Here's mine on my K6 750:
http://i9.photobucket.com/albums/a54/03_silver_sv/DSC01173.jpg

Here are mine installed, Corey thanks again for the fast service:)

anyone used the shorty clutch in heavy traffic? can't decide which clutch lever to get, i sometimes get stuck in heavy traffic and wonder how much of a bitch a shorty clutch lever will be...

anyone used the shorty clutch in heavy traffic? can't decide which clutch lever to get, i sometimes get stuck in heavy traffic and wonder how much of a bitch a shorty clutch lever will be...

All the time. You get used to it quickly. I use 3 fingers on it because it's a tad long for just 2.:cheers

guys the pics look great! very cool

yeah how many prefer the shorty pazzo's compared to the regular? I know that with the long stock clutch lever I can't pull it in with 2-3 fingers because it won't fully engage because my fingers are in the way. I have really big and long fingers so im thinking about getting the shortys :)

30 to 1 take the shorties :)

coupon still works but slight increase in the price. sorry guys...still a good deal and pay via google and you get the google discount with that and on all orders :)

now doing free reservoir covers with every purchase of pazzo's :)

I ordered mine Wed. night. Just wondering if I might get the cover. Either way I can't wait till my order gets here. Pics will be posted when I get everything. I ordered a Puig windscreen, Shogun crash kit, and Short Pazzo's (black with red adjusters).

What about free cover with rearsets, brake lines, pads, hugger? Maybe you could throw one in when my Fren Turbo lines ship. ;-)

Finally had time to get everything installed. My whole order was delivered in 2 days. This is the best service I have ever experienced. Thanks Cory!
Now some pics of what I ordered.
She is a little dirty, but it was either install new parts or wash her. Hope I picked the right choice.
http://i160.photobucket.com/albums/t191/bencatchot/IMG_0226.jpg
http://i160.photobucket.com/albums/t191/bencatchot/IMG_0225.jpg
http://i160.photobucket.com/albums/t191/bencatchot/IMG_0221.jpg
http://i160.photobucket.com/albums/t191/bencatchot/IMG_0222.jpg
http://i160.photobucket.com/albums/t191/bencatchot/IMG_0224.jpg
http://i160.photobucket.com/albums/t191/bencatchot/IMG_0223.jpg

Just wanted to see if you have the black long levers w/red adjusters in stock for the K7 1K before I order? If they're on hand I'll be ordering them and the diamond grips tomorrow. BTW, are you a U.S. distributor for R&G Racing products? I bought frame/fork/swingarm sliders and barends from them direct for my 04 Aprilia RSVR but if I can get the barends for the K7 1K from you I'd rather do that. And one last item that I didn't see on your site, do you have the Galfer SS clutch lines? Maybe I'm just retarded and didn't look in the right place:confused :wacko Thanks and I can't wait to place my order.

got my levers today...Corey you're the man..thanks

I just order black levers with red adjuster, and a dark smoked puig windshield.

Thanks for the discounts, free shipping, and my brake band....

Do I get a tracking number?
Ryan

we ship priority mail with confirmation numbers. You'll be able to see it via order tracking, but i don't see why it wouldn't ship out on monday :D Only screens backordered through both distributors are the dark smoke 06 gsxr 600/750 screens. We sold our last ones today and there is no way to get restocked right now. We stock a ton, but when the distributors are out for weeks then it makes it hard to get restocked. other then that screen i think everything else in stock (going off the top of my head since i'm at home).

You'll be able to see if you order shipped by logging into the order tracking monday afternoon and it should state "completed" when shipped.

we ship priority mail with confirmation numbers. You'll be able to see it via order tracking, but i don't see why it wouldn't ship out on monday :D Only screens backordered through both distributors are the dark smoke 06 gsxr 600/750 screens. We sold our last ones today and there is no way to get restocked right now. We stock a ton, but when the distributors are out for weeks then it makes it hard to get restocked. other then that screen i think everything else in stock (going off the top of my head since i'm at home).

You'll be able to see if you order shipped by logging into the order tracking monday afternoon and it should state "completed" when shipped.

Corey-

Just trying to get some info before I order. Are the long black levers in stock for the K7 1K? And do you have the SS clutch lines? Thanks.