Well, I'm not a technical wizard so better ask here before I get some parts http://www.gixxer.com/forums/images/graemlins/smile.gif

What newer parts will fit "directly" on my 87 - 750?
First of all thinking about front end, like forks brakes wheel etc but other stuff could be cool to.

Also another thing I wonder about: I had some help adjusting my rear-damper (ohlin piece), but still the bike feels "soft", even when I tried at the "hardest" setting. Anything I can do, or should I just stop working out in the gym http://www.gixxer.com/forums/images/graemlins/smile.gif

http://www.gixxer.com/forums/images/graemlins/squid.gif

As long as it doesn't "wallow" on corner-exits or drag parts on the ground, "soft" is good.

All front ends from 88-95 750's, 89-98 1100's, and don't forget the 92-93 600 will slide right in (using the triples for the new front end) and all have the same caliper bolt patern (4 or 6 piston) and used the same 310 rotors. Differences will be with the steering stops and Steering dampner mounts. Your lock post from the Ign switch may not line up wth the hole in the frame but it depends in your front end.
Bones