InterNatrix TW-1000 install instructions for 07 750 - Suzuki GSX-R Motorcycle Forums Gixxer.com
 
LinkBack Thread Tools Display Modes
post #1 of 8 (permalink) Old 07-06-2009, 06:14 PM Thread Starter
Back Marker
 
GIXXERKELLY's Avatar
 
Join Date: Jan 2008
Location: Katy,TX
Motorcycle: 2007 GSXR 750
Posts: 112
InterNatrix TW-1000 install instructions for 07 750

I just finished up my install of this alarm. I thought this was a nice bang for the buck. I did have a couple of questions during the install and called Internatrix tech line. They were very pleasant to deal with. I hope the following will help someone with a K7 that is thinking of installing this alarm.

Here is a link to InterNatrix

http://www.internatrix.com/

First remove the plastic on the back section of your GSXR. This will make the install much easier.








The inside of the side panels is quite roomy if you want to install some of the pieces here (shown for reference only)





I removed my set valve a month ago so, I mounted the brain in the same place since they are almost the same size. The adhesive that comes with it is pretty sticky. I cleaned the area with rubbing alcohol before placing it on the bike.



Remove the exsiting screw and attach the short ground wire to the frame.



I mounted the siren and perimeter sensor under the seat.



I mounted the antenna on the left side of the bike. Clean the bike's frame before sticking to the frame. I added zip ties for extra safety.



Zip tie the main unit in place when your happy with it's location.



I drilled a hole in my license plate bracket to mount the LED light.



Locate the wiring coming off the rear center section. You will need to tap three wires.

For a switchable hot, tap the brown wire for the tail light. Attach the brown wire from the alarm.

Find the blueish/green wire for the turn signal on one side. Attach the blue wire from the alarm.

Find the black wire for the turn signal on the other side. Attach the orange wire from the alarm (DO NOT TAP THE BLACK WIRE WITH THE WHITE STRIPE!)



Locate the starter relay. It is on the right of the siren.



Locate the yellow wire with the green line. Cut this in two. Attach the black wire with the white stripe to one end and the white wire with the black stripe to the other. This will disable the starter if the alarm goes off.







Tuck any wires that are hanging down and reinstall the plastics.



I'll try and post a video of it's functions later. I didn't show the attachment of the positive/negative wires to the battery since I feel this should be easy to understand. The wiring of the perimeter sensor, LED, and siren are plug and play.

I hope this helps someone.

Cheers,

Kelly

2007 GSXR 750

GIXXERKELLY is offline  
Sponsored Links
Advertisement
 
post #2 of 8 (permalink) Old 07-06-2009, 07:11 PM
Lifetime Premium
 
utp216's Avatar
 
Join Date: Sep 2002
Location: Baltimore, MD
Motorcycle: 93/95 GSXR 750
Posts: 7,715
Re: InterNatrix TW-1000 install instructions for 07 750

Nice write up dude!

BTW: What did the alarm cost?
utp216 is offline  
post #3 of 8 (permalink) Old 07-06-2009, 08:54 PM
Novice
 
Hidalgo's Avatar
 
Join Date: Feb 2008
Location: Nueva Zelandia
Posts: 55
Re: InterNatrix TW-1000 install instructions for 07 750

good one. Waiting for the video. Thanks
Hidalgo is offline  
post #4 of 8 (permalink) Old 07-06-2009, 09:29 PM Thread Starter
Back Marker
 
GIXXERKELLY's Avatar
 
Join Date: Jan 2008
Location: Katy,TX
Motorcycle: 2007 GSXR 750
Posts: 112
Re: InterNatrix TW-1000 install instructions for 07 750

Quote:
Originally Posted by utp216 View Post
Nice write up dude!

BTW: What did the alarm cost?
$157 shipped
GIXXERKELLY is offline  
post #5 of 8 (permalink) Old 07-07-2009, 09:28 PM
Rookie
 
wowitztai's Avatar
 
Join Date: Jan 2006
Location: South Philly
Motorcycle: 2006 GSX-R 600
Posts: 624
Re: InterNatrix TW-1000 install instructions for 07 750

Thinking about putting one on. I wonder if the Vipers would work.
wowitztai is offline  
post #6 of 8 (permalink) Old 02-22-2010, 10:52 PM
Novice
 
FEDXBOX's Avatar
 
Join Date: Oct 2006
Location: lake mary FLORIDA 32746
Motorcycle: 2006 SUZUKI GSX-R 600
Posts: 59
Re: InterNatrix TW-1000 install instructions for 07 750

this is the best installation tutorial, thank a lot.........
FEDXBOX is offline  
post #7 of 8 (permalink) Old 05-11-2011, 03:02 PM
Squid
 
Join Date: Mar 2011
Posts: 1
Re: InterNatrix TW-1000 install instructions for 07 750

Heads up; this system is now on Closeout for $130 shipped.

http://www.internatrix.com/
ReasonableDoubt is offline  
post #8 of 8 (permalink) Old 11-26-2012, 07:54 AM
Squid
 
Join Date: Nov 2007
Posts: 11
Re: InterNatrix TW-1000 install instructions for 07 750

fantastic write up. Does anyone have any instuctions and how to on getting the remote start to work?
GSXRWallace is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Suzuki GSX-R Motorcycle Forums Gixxer.com forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome