Suzuki GSX-R Motorcycle Forums Gixxer.com banner

Interchangeable parts

434K views 377 replies 208 participants last post by  ted_lim_76 
#1 · (Edited by Moderator)
I've been searching for some replacement parts for my bike, and to find info on some of my upgrades. Thought I'd compile a list of some of the things I have found out, to help others search. Please correct anything wrong in my list or add other things. Maybe we could make a sticky?

In general:
00-03 750 is all the same. (some electronics are different)
01-03 600
01-02 1000.

750 and 1000 clipons are compatable.

Windscreen / rear seat:
00-03 750s
01-03 600's
01-02 1000's are all interchangeable


Fairings:
all fairing stays are compatible from the same gen.

gsxr 600 and 750 are interchangeable from 2001-2003
gsxr 1000 from 2001-2002

PS: The side fairings from 1000 are not really interchangeable with other models.. everything else is.

Front fender:
01-03 600, 00-03 750, and 01-02 1000 are the same fender.
04-05 600/750, and 03-04 1000 are the same fender but won't fit the above models without modifying the rear fender mounts.
06-07 600/750, and 05-08 1000 are the same fender and will bolt straight up to the list directly above (the previous generation) and will need the modification as above to fit the first-gen K series.
[/LIST]


Wheels:
600 01-05 - 17x5.5
750 00-05 - 17x5.5 / 17x6.0

all interchange

Rear wheel:
1000 01-04 - 17x6.0 should also fit a 00-03 750
SRAD rear wheel - 17x5.5 (needs sprocket, sprocket carrier, and all the wheel spacers too.)

05 GSXR1000, 06 600/750, and onwards rims are lighter with thinner spokes.

Rear shock interchangeability:
600 2001-2003
750 2000-2003
1000 2001-2004 (a little bit higher?)
600/750 04/05 (7mm higher)

Exhaust:
Bolt-on:
2001-2003 600
2000-2003 750
2001-2004 1000
04-05 gsxr 600-750
Are all the exact same 4 bolt pattern?

Headers:
01-06 1000 headers will fit.
you have to buy the same year pipe as you do headers.
05-06 headers are the most popular bc of the m4 GP slip-on.

Rear rotors:
01-08 have the SAME REAR ROTORS

Engine:
In the 750 the 1000 motor will bolt right up with the exception of the top right front motor mount. They do sell brackets that allow you a Bolton or you can have a fab shop make some for you. You will need to buy a 1000 motor kit (harness, CDI, speedo, throttle body, radiator, oil cooler, etc)

Swingarm:
2000-03 750
2001-02 1000
2001-02 600
These are interchangeable, but som

96-99, 00-03, and 04-05 have the same in the front pivot section, but the length is different (but not much).

03 1000 on my 600 and it fits perfectly but need the rear caliper and mount...

Tail:
04-05 will fit with modifications.

Front forks:


00-03 750 forks and brakes. It's the cheapest, easiest, and the better setup.
04 +750/600 or 05 + 1000 Better, more expensive.
 
See less See more
1
#20 ·
Anybody know about the gas cap's? Common thing.. I have one, can't get the lock out to change it over to my new lock...going to try and pick it..

I need a new gas cap on my 2000.. and wondering what one to go with.. 03-02-01, or 05-06?
 
  • Like
Reactions: Jay Houghtalling
#21 ·
Anybody know about the gas cap's? Common thing.. I have one, can't get the lock out to change it over to my new lock...going to try and pick it..

I need a new gas cap on my 2000.. and wondering what one to go with.. 03-02-01, or 05-06?
Gas caps can be hard to pick. If you aren't going to use the old one anyways, you can just break'em with a screwdriver sometimes. Take a big flatbladed screwdriver, stick it in the key slot, put a pair of vice grips on the screwdriver, and then give it a sideways whack. That often breaks them loose internally... and then after that you can just use a screwdriver or key to turn them to open them up. Or, it at least gets the cap open, so now you can unbolt it.

Worked for me before....
 
#142 ·
Is this for all the bikes? I have an 01 600 i need a gas cap for and seen some 4 bolt bikes. I know my bike has 8 bolts but only 4 of which actually thread into the tank the rest seem like they just bolt to the flange for show.

So will any 4 bolt pattern fir the 01 600 or do i need one for 03 and below?
 
#28 ·
I've been searching for some replacement parts for my bike, and to find info on some of my upgrades. Thought I'd compile a list of some of the things I have found out, to help others searching. Please correct anything wrong in my list or add other things. Maybe we could make a sticky?

In general:
00-03 750 is all the same. (some electronics are different)
01-03 600
01-02 1000.

750 and 1000 clipons are compatable.

Windscreen / rear seat:
00-03 750's
01-03 600's
01-02 1000's are all interchangeable


Fairings:
all fairing stays are compatable from same gen.

gsxr 600 and 750 are interchangeable from 2001-2003
gsxr 1000 from 2001-2002

PS: The side fairings from a 1000 are not really interchangable with other models.. everything else is.

Front fender:
01-03 600, 00-03 750, 01-02 1000 are the same fender.
04-05 600/750, 03-04 1000 are the same fender but won't fit the above models without modifying the rear fender mounts.
06-07 600/750, 05-08 1000 are the same fender and will bolt straight up to the list directly above (the previous generation) and will need the modification as above to fit the first gen K series.
[/LIST]


Wheels:

600 01-05 - 17x5.5
750 00-05 - 17x5.5 / 17x6.0

all interchange

Rear wheel:
1000 01-04 - 17x6.0 should also fit a 00-03 750
SRAD rear wheel - 17x5.5 (needs sprocket, sprocket carrier and all the wheel spacers too.)

05 GSXR1000, 06 600/750 and onwards rims are lighter with thinner spokes.

Rear shock interchange ability:
600 2001-2003
750 2000-2003
1000 2001-2004 (a little bit higher?)
600/750 04/05 (7mm higher)

Exhaust:
Bolt on:
2001-2003 600
2000-2003 750
2001-2004 1000
04-05 gsxr 600-750
Are all the exact same 4 bolt pattern.

Headers:
01-06 1000 headers will fit.
you have to buy the same year pipe as you do headers.
05-06 headers are the most popular bc of the m4 gp slip on.

Rear rotors:
01-08 have the SAME REAR ROTORS

Engine:
In the 750 the 1000 motor will bolt right up with the exception of the top right front motor mount. They do sell brackets that allow you a bolton or you can have a fab shop make some for you. You will need to buy a 1000 motor kit (harness, cdi, speedo, throttle body, radiator, oil cooler etc)

Swingarm:
2000-03 750
2001-02 1000
2001-02 600
These are interchangeable, but som

96-99, 00-03, 04-05 have the same in the front pivot section, but the length is different (but not much).

03 1000 on my 600 and it fit perfect, but need the rear caliper and mount...

Tail:
04-05 will fit with modifications.

Front forks:


00-03 750 forks and brakes. its cheapest, easiest and the better setup.
04 +750/600 or 05 + 1000 Better, more expensive.
hi ive just fixed a starting problem on my gsxr 750 y , it turned out it was the starter clutch, they are interchangable from the 600 750 and 100 from 2000 to 2003 , also the starter is the same but only for the 600 and 750, the starter idle gear is the same for all ,hope this helps someone, it took me hours to find out!
 
Top