Join Date: Oct 2010
Location: 750 xro lane,gixxershire,suzukiland
Motorcycle: gsxr k1 1000 184.5 rw bhp ex race bike day time mot project and xro7 project build
Re: Aluminium Fuel tank
right chaps,as pointed out the tank, ero/xro are difernet but will fit over ome air box,but an ero tank will not fit xro air box,the carb xro6/7 tank will not fit xro8/9 air box,the xro box on the xro8/9 came in three sizes and could also use the xro6/7 that came in two sizes and aslo the kit ero one...so the tanks are all made to fit the correct air box,just getting an ali tank and then getting it to fit is a gamble.
the tank in question i have seen before and if any one noticed the tank is set up for twin fillers so i guess its 24lt tank that needs the endurance air box with is it..(some 24lt set ups need the matching air box as the air box is ...yet agine another type has seen them with cdi inside and a different shape)..
it has a fuel return for inj set up next to fuel pump...the make up of the tank i have seen before,in one way it looks like an early xr05/6 tank as in the way it is made up(the pieces of ali to make the tank up under neath,have a list some were of the amount of bits in a tank...later tanks had fewer bits in there construction)
but if not all the tanks were moded at some point...so have to take it on face value ,tank would have all paint removed to see top construction,three or four parts construction.
the flat bottomed edge that has been pointed out could be for the air tray,all ero/xro tanks have this.
XRO PARTS....YUMMM,YUMMMM..beter get some bog roll......to clean them of course.
Last edited by speedy sie; 01-05-2013 at 02:15 AM.