Hi i have a 98 Srad im in the middle of installing a new loom i baught its all wired up working sweet i got a service manual so i can look at the harness routing diagram but my only confusion is in the pic below that i circled if the wires come out that way the tank pinches the wires is this normal or am i looking at this wrong?
ah ok got it thanks so not pass the carbs it goes down and out the frame right when i removed the old wiring it was passing the carbs but i thaught they would get rather hot and fry the wires possibly? my old loom was butchered thats why i got a new one
you can get some of the loom casing at the auto parts store and beef it up around the engine and clean up the harness, looks cleaner and keeps the wire from contacting anything hot and melting the wire..
I didn't like how its so close to the radiator so I used some loom casing to insure some air passes between them.