Join Date: Feb 2008
Motorcycle: GSX-R750H, Ducati 1198 SP
Re: do the fork damper adjusters come apart
I made a wrench out of a piece of flat steel and took mine apart for powder coat. This was on the first generation PDF type, not NEAS. Turn the black knob to setting #4, this creates a gap just big enough to unscrew the unit. You will notice a flattened portion on each side of the aluminum collar under the black cap. This is where your (very thin, homemade) wrench will bite on that collar. Unscrew the collar and the unit comes apart. Putting it back is a little tricky in lining up the damping positions to the marks on the housing. Good luck!