Great job on the lower cooler. I like the fitment. I would have installed one there but this build is going to be correct as possible, so I opted for the two larger coolers mounted in the higher location. Just as yosh did back in the day.
The header should be done here in a week or so, I'll post pics of the work when I get it all together.
I can't see how the gsxr upper fork tubes don't contact the outer cooler at full left/right travel to the steering stops. Is the lower clamp steering stop changed from the stock location to prevent that? I've been trying to find a location for a second cooler out front and have that interference
There was one and only one spot to put the coolers. The trick was in the yoshimura headers they used one the race bikes back in that day. They had an aggressive downturn and primary that where narrow at the port and wider as they moved further away. I think they where going for a Bernoulli's thing there.
After mounting the coolers with the brackets I made. I had to modify the Hindle I had header to fit around the coolers, giving them more downturn off the exhaust ports. I'll get pics up in a bit so you can see. But a lot of work, no doubt.
BTW I'm dark irish too bud.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
turn 3 is ok,,but the bowl and the run up the hill is attention getter,,,flippin it hard over to the right pretty much blind and of off cambered is great for scaring the pants off ya,,LOL..
Hell yeah and going out of the bowl up thru the trees (doh) and then hard left downhill. Pretty awesome actually. Gotta watch 2A it can get ya, I highsided there and broke a collar bone. ugh. Racing there on an FZR400 is really fun